Eco-sustainable technology for
the processing of healthcare waste (HCW),
on-site or in centralized treatment centers.

Lab Fluid Waste

Newster PURA LAB 4.0 is a patented plant specific for the treatment of medical laboratory fluid wastes to remove both biologic and chemical hazards from the water discharged. PURA LAB 4.0 can treat:
Instruments waste water
Sample preparation solutions containing
biological fluids
Surfactants and Disinfectants
Traces of Folrmaldehyde
Traces of Solvents
Chemicals and traces of heavy metals

PURA LAB 4.0 is specific for medium/large laboratories and external centralized plants.The process is a batch treatment and the final layout depends on both the volume and the characteristics of the fluid waste.
The plant usually consists of a pre-treatment module, a chemical advanced oxidation phase, a sludge separation and a final filtration. The cycle utilizes a customized Fenton reaction.
At the end of the advanced oxydation reaction, the pH is neutralized, so the solid particels precipitate. The sludge is separated from the water. It is then slowly pumped into the filtration module for the drying phase. The final clarification phase of the water consists of a duble step treatment: mechanical filter and activated carbon.
The clarified water is transfered to a final tank before being discharged. The pre-treatment module ore the
post-treatment filtration is customized and based on the pollutant concentration and the final destination.
The complete layout is fine connected with the site-specifi fluid waste production

 
General Layout:

1) Equalization tanks
2) Pumping System
3) Pre-treatment stage for dedicated types of
fluid waste
4) Advanced Oxidation Process Module
complete with pumps and chemical dosing
system
5) Thickening Sludge Module
6) Filtration System
7) Ozone treatment
PS: number, dimension and characteristic of each
componts will be designed considering the
volume of waste waster and its characteristic
 


 

♦   ♦♦♦   ♦♦♦   ♦♦♦   ♦♦♦   ♦♦♦      ♦♦♦   ♦♦♦   ♦♦♦♦♦♦

 

Newster PURA CO3MPACT is a specific plant for the decontamination of medical laboratory fluid wastes with the aim to remove biologic hazards and reduce chemical hazards from the water discharged. It can treat:
  •  Instruments waste water
  •  Sample preparation solutions containing traces of
  •  biological fluids
  •  Surfactants and Disinfectants
PURA CO3MPACT is a specific on-site treatment for a maximum daily capacity of 150 Litres. The process is a batch
treatment and the cycle time depends on the pollutants concentration.
The treatment is based on ozone gas and hydrogen peroxide liquid, combined in a pre-determined ratio. The cycle utilizes a customized Peroxone reactive and doesn’t produce any sludge.

Treatment Efficacy
Bacterical Contamination: 6Log10 Reduction
Reduction of chemical components
Evident clarification of waste water
No sludge
No hazardous emissions

General Layout:
1) Equalization tanks
2) In line activated carbon filter
3) Pumping System
4) Advanced Oxidation Process Tank complete
with ozone generator 40 g/r, pumps and
chemical dosing system

 

Siti internet by Pianetaitalia.com